We ensure that the work we do is to the very highest standards of safety and quality, at a competitive price.
We are approved contractors and our work is covered by a insurance packed warranty and we are fully compliant with Part “P” regulations. All work to BS7671 (17th edition wiring regulations) and to Part P of the building regulations an essential legal requirement for any domestic installation.
– Domestic and Commercial Installations
– Electrical Installation and Alterations
– Electrical Repairs and Routine Service
– Fire Alarm Installation, Service and Maintenance -Including Addressable Systems
– Emergency Lighting Installation, Service and Maintenance
– Audio and Video door entry systems (Access) Installation and Service
– Automatic Door Openers and Closers – Installed, Maintained and Repaired.
– Landlords Electrical Certificates, Periodic Electrical Testing, Inspection and Certification
– CCTV Installation and Service
– Electrical control systems designer and builder
We are a specialist engineering company structured to provide the best total engineered solution for our customers heating and ventilation control. Our areas of expertise encompass all major disciplines involving the treatment, control and utilisation of air and how they are applied in modern life.
In most parts of the country, a home’s heating and cooling system is its largest energy so it’s important to have an efficient, economical and reliable system. That’s why more UK Residents use natural gas heating systems than any other kind.
Natural gas can heat your home by creating warm air or hot water. The most common type of system in the UK is a “wet” central heating system that uses a natural gas burner to heat. The water is then circulated through pipework work in the home by a circulating pump. Rooms are heated via radiators or pipes built into the floor.
Most older natural gas boilers have efficiencies lower than 65 percent, but today’s natural gas systems have “A” ratings that range from 88 to 97 percent.
If its a full heating system or just a boiler service then Nationwide Renewable Energies can provide a fast and reliable installation. Please email with a time and date and most boiler services will be booked to suit your time schedule. We are registered with Gas Safety and monitored by CORGI.
We offer a full maintenance programme so that all of your business’s appliances can be tested and kept up to date. We also keep you reminded when your tests need renewing so that your business meets all of the legal responsibilities that it needs to.
Heating Ventilation & Air Conditioning is the process of treating the temperature, humidity, cleanliness and distribution of the air within your property.
Our Air Conditioners offer precise temperature control. You can create the climate in which you feel most comfortable with the right temperature. Not only does it create comfort, it makes you feel fresh and active even in the most extreme outside conditions.
It is an environmentally friendly alternative to traditional heating because it recovers energy from the outside air and re-uses it rather than burning fuel (gas, oil, electricity) hence the name Heat Pump, the system pumps heat from one place to another.
Our air conditioners produce clean, healthy air. Our indoor units are equipped with dust filters, photocatalitic pollen filters and anti-allergen filters. According to the needs of the customer the level of filtration can be increased. Filtration is critical for people with allergies and should be considered at the design stage.
In cooling mode an Air Conditioner dehumidifies the air creating a better feeling of well-being. Correct humidity level limits the growth of dust mites and moulds, which again has a positive effect on persons with allergies. Human beings feel that 40 to 60% is a comfortable level of humidity. Also a correct humidity level ensures a longer lifetime of your appliances and can assist with sleeping on warm nights when breathing doesn’t come easily. These appliances have a low running noise level, approximately 36 dB (average).
Ventilation can be integrated in the air conditioning system. To take out the inside air and push in fresh conditioned air from outside. In mid season, when the air conditioning is turned off, the ventilation can work independently. Our ventilation systems can also be installed without the air conditioning installation.
If its a full Air conditioning system or just a AC service then Nationwide Renewable Energies can provide a fast and reliable installation.
A combination Boiler is an ingenious space-saving idea, and an increasingly popular choice in UK homes. In fact, combination boilers now account for well over half of all the new domestic boilers installed in Britain every year.
A condensing combination boiler is both a high-efficiency water heater and a central heating boiler, combined within one compact unit. Therefore, no separate hot water cylinder is required, offering space saving within the property.
Significant savings can be made on hot water costs and the fact that hot water is delivered through your taps or shower at mains pressure. So you can enjoy powerful showering without the need for a separate pump.
Another combination boiler benefit is that it can generally save you money on installation time and costs, since no tank in the roof space means less pipe work and a shorter installation time.
This exciting new product combines tried and tested technology with an innovative system to produce hot water heating far more efficiently than fossil fuels. This product comes with the cutting edge thermodynamic technology built in to a 200 litre cylinder which is highly insulated. The insulation is so good that the cylinder will only lose 5°C of heat between 1 to 2 days if not in use.
The Atmospheric Thermodynamic panels are part of the next generation of green technology, overcoming the disadvantages of traditional Solar thermal hot water heating by working 24 hours a day, 365 days a year down to temperatures of -15°C.
The COP (Coefficient of Performance) measures the efficiency of a system and calculates energy produced (heat) for a given electrical input. The higher the COP the better. This system is substantially more efficient than traditional Solar thermal systems.
We are able to provide services for plumbing, central heating installs, bathrooms, appliance repairs, boiler installations and all your domestic maintenance requirements.
We offer a fixed charging system at economical rates and guaranteed work, with a 24 hour service and 2 hour premium response time. All of our workforce are skilled engineers who are highly experienced and skilled in their craft that adds to our reputation for customer satisfaction.
We complete thousands of jobs annually and returning customers account for 90% of our work – a customer satisfaction loyalty which few other companies can match.
Although most households in the UK have mains gas central heating, around 4 million households are not connected to the mains gas network.
In parts of the UK where there is no mains gas network to connect to, such as rural areas, some homes use heating oil instead. This is normally used in a ‘wet’ heating system where an oil-fired boiler heats water, which provides central heating via radiators and hot water through the taps in your home.
The main difference between mains gas and heating oil is that it is delivered by road and stored in a tank, which you may have to buy or rent from your supplier.
We can carry out a power flush of your central heating system, encompassing your radiators valves pump boiler and cylinder coil at the same time, each radiator and parts of the system are given a thorough flush with a special chemical designed to breakdown sludge at its worst.
With a high powered magnet in series with this operation the sludge is removed from the system, then after various other chemical treatments and clean water flushing the system is restored to a new like system and operates at a amazing efficiency.
Most systems of a standard size 4 bedroomed house costs £630.00 from us to perform as opposed to £900 + the UKs bigger sites will charge.
If you require us to look at your domestic fridge or commercial cold room we are available to do so. Should you require a free, no obligation surveys please contact us to discuss your needs.
We can link any heat sources together via say a Thermal store which heat can then be distributed throughout the premises at variable temperatures.
All electrical and electronic controls bespoke or not if required can be built to suit a system encompassing a priority heat input to link and make the systems operation faultless and efficient, incorporating optimisation of building direction and weather compensation parameters etc.
Under floor heating uses radiant heat ensuring that you feel comfortable even at a lower air temperature than that produced by a more conventional heating system. With under floor heating all the floor is heated so no matter where you are in the room its all the same temperature. The heat rises and surrounds you and your furniture leaving you with warm feet and a cool head.
If linked to a Outside Heat Pump this is an optimum operation for the heat pump and under floor temperature as a heat pump operates at its highest efficiency at 35 to 55 degrees centigrade.
Thermal stores are becoming increasingly common in domestic renewable heating technologies.
They can be used:
– with a single renewable heating technology
– to combine a number of different renewable heating technologies
– as a renewable technology with a conventional boiler or immersion heater
– to store excess solar energy that you have generated.
Thermal stores have proved to work particularly well with wood-fuelled boilers, heat pumps, and solar water heating systems. A thermal store is a way of storing and managing renewable heat until it is needed. In a domestic setting, heated water is usually stored in a large well-insulated cylinder often called a buffer or accumulator tank.
A thermal store may contain one or more heat exchangers, usually in the form of internal coiled pipes or external flat-plate heat exchangers. It may also include an electrical heating element, such as an immersion heater. A purpose-built thermal store can take inputs from a number of different technologies, provided it has been designed and sized to work with them all. It might store heat from a wood-fuelled boiler, solar water heating or a heat pump. A thermal store can also provide: both space heating and mains pressure hot water space heating only (which may be the case with a heat pump system) hot water only (common in the case of a solar water heating system). But the full potential of a thermal store is realised when it is used to store and manage a number of different heat inputs and outputs.
Unvented Hot Water Cylinders work directly from the mains supply of water and are essentially a hot water storage cylinder, whereas vented cylinders are connected, via a feed pipe, to the cold water storage tank which is usually located within the loft space of most properties.
Because unvented cylinders are fed directly from the mains supply of water, the water pressure and flow is much stronger, providing hot water at mains pressure to all outlets within the home. This means you don’t have to rely on a pump to maintain the strength of the flow when using hot water outlets or heating systems and great water pressure is a huge benefit, especially for homes with more than one bathroom. The cold is fed from this pressure regulator also which means the hot and cold are balanced throughout the house.
We fit a variety of electric boilers such as Amtec eletric boilers, that are fitted depending upon the premises. Amtec boilers provide a good rate tariff and perform efficiently.
We re-gas cars, vans and commercial vehicles. Annual servicing of your vehicles air conditioning system can be beneficial in detecting problems such as leaks in the system and defective components thus maintaining efficiency throughout the year.
The full premium service consists of:
– Check system pressures, and analyse refrigerant content.
– Check refrigerant for contamination.
– Check functioning of all controls and air distribution.
– Check condition of all pipes, fittings and condenser.
– Check cooling fan operation.
– Check belt tension and condition.
– Check drain tubes for obstructions.
– Leak test system with oxygen free nitrogen.
– Degas, measuring quantity extracted, match data for vehicle.
– Spray condensor with coil cleaner.
– Spray evaporator with anti bacterial liquid.
– Replace receiver dryer.
– Evacuate and recharge.
– Add leak dye to system.